Overview
The Wilson 301102 Dual Band Glass Mount Antenna is a dual band antenna with 3.5 / 4.8 dB of gain. It can be used with one of the amplifiers on our site, or connect directly to your phone with an adapter cable (see below). The antenna is made of stainless steel and is fully weather-proof.
Installation:
The Wilson 301102 is an omni-directional antenna. Omni-directional antennas receive signal from all directions, and so the antenna needs to be installed in a vertical position in the area of strongest signal.
Mounting details:
The Wilson 301102 uses a Glass Mounting with 3M Adhesive mount.
Glass Mount Antennas require no alterations to the vehicle and are more permanent than Magnetic Mount Antennas. The antenna base attaches to either side of a piece of the vehicle glass with a 3M VHB adhesive. They work well on automobiles, vans and SUVs but cannot be easily moved from one vehicle to another.
NOTE: Glass Mount Antennas are not recommended for use with wireless amplifiers. The inside and outside antennas must be shielded from each other to prevent oscillation.
Direct connect option:
You can also use the Wilson 301102 instead of your phone's standard antenna, by attaching the 301102 to your phone's external antenna port. Most phones have these ports, and all you need to make it work is a Wilson adapter cable.
Additional Information
Frequency |
Dual Band |
Impedance |
50 ohm |
Coaxial Cable |
RG58 - 14 feet |
Antenna Gain (low band / high band) |
3.5 / 4.8 |
Frequency detail (up/down) |
824 - 849 MHz / 869 - 894 MHz and 1850 - 1910 MHz / 1930 - 1990 MHz |
Height (Inches) |
15 |
Ground Plane |
Built-In Ground Plane |
Material |
Whip - Stainless Steel |
Mount |
Glass Mounting with 3M Adhesive |
Polarization |
Vertical |
Wavelength |
1.1 Wavelength 806-894 MHz / 2.3 Wavelength 1850-1990 MHz |
Radiation |
Omni-directional |
Connector Type |
FME Female |
|
|
|
|
Price: USD 36.00 |
$36 |